|
|
|
|
SONDE DE TEMPERATURA SI UMIDITATE
1. Masurarea wireless a temperaturii
2. Termocuple
3. Termorezistente
4. Umiditate
5. Accesorii
|
MASURAREA WIRELESS A TEMPERATURII
|
JUMO Wtrans - Wireless probe RTD temperature probe with wireless transmission of the measured values (90.2930)
- For operating temperatures from -30 ... +260°C
- For mobile or stationary temperature measurement
- Open air range 300m (1000 feet)
- No wiring work due to state-of-the-art wireless technology
- Fail-safe transmission through telegram frame coding
JUMO Wtrans receiver for RTD temperature probes with wireless transmission of the measured values (90.2931)
- For temperature measurements from -30 to +260°C
- Interface RS485 with Modbus protocol
- Wireless measured value receipt
- No wiring work due to modern radio technology
- For maximum 16 probes per receiver
|
|
|
|
TERMOCUPLE
|
Date de baza
|
Connections for resistance thermometers and thermocouples (90.0002)Pentru date suplimentare in limba germana descarcati fisierul pdf de aici
Construction and application of thermocouples (90.1000)
|
|
|
|
Termocuple pentru montaj cu filet
|
Screw-in thermocouples with terminal head Form B (90.1002)
- for temperatures from -200 to +800°C
- available with different thermocouples
- as single or twin thermocouple
- terminal head Form B, BUZ, BUZH, BBK
- available with transmitter
Screw-in thermocouples with compensating cable (90.1005)
- for temperatures from -200 to +600°C
- vailable with different thermocouples
- as single or twin thermocouple
- compensating cable in silicone or with metal braiding
Screw-in thermocouples with terminal head form J (90.1030)
- for temperatures from -200 ... +800°C
- As single or double thermocouples
- Structure isolated or connected with thermowell
- Protection class IP65
|
|
|
|
Termocuple pentru instalatii si aparate verificate conform DIN 3440
|
Thermocouples for equipment and systems tested to DIN EN 14 597 (DIN 34 40) (90.1006)
- for indirect heating systems to DIN 47 54
- for temperatures up to 1500°C
- as single or twin thermocouple
- for operation in water, oil or air
- for tested control and limiter instruments
|
|
|
|
Termocuple de insertie
|
Push-in thermocouples with Form A connection head (90.1101)
- For temperatures from -200 to +1600 °C
- With thermowells made of various materials
- As single or double thermocouple
- Available with transmitter
Push-in thermocouples with compensating cable (90.1105)
- for temperatures from 0 to 600°C
- available with different thermocouples
- with stainless steel protection tube
- silicone compensating cable or with metal braiding
- also with 90° cable entry
Push-in thermocouples with Form B connection head (90.1102)
- For temperatures from -200 to +1600°
- With thermowells made of various materials
- As single or double thermocouple
- Connection head form B, BUZ, BUZH, BBK
- Available with transmitter
Push-in thermocouples with bayonet lock (90.1109) (90.1102)
- for temperatures from 0 to 400°C
- as single or twin thermocouple
- good heat transfer through adjustable spring pressure
- insulated assembly, or joined to protection tube
- insertion and removal without tools
|
|
|
|
Termocuple cu izolatie minerala
|
Mineral-insulated thermocouples to DIN 43 710 and EN 60 584 (90.1221)
- for temperatures from -200 to +1200°C
- flexible sheath with shock-proof measuring insert
- protection tube diameter from 0.5mm
- fast response
- fitting length to suit application
|
|
|
|
Termocuple de insertie in produse alimentare
|
Thermocouple Insertion Probes (90.1305)
- For temperatures from -100 ... +260°C
- Steam-tight
- High mechanical strength
- For use in the food industry
- Available with multiple measurement points
|
|
|
|
TERMOREZISTENTE
|
Date de baza
|
Construction and application of resistance thermometers (90.2000)Pentru date suplimentare in limba germana descarcati fisierul pdf de aici
|
|
|
|
Termorezistente pentru montaj cu filet
|
Screw-in resistance thermometers with terminal head Form B (90.2002)
- for temperatures from -50 to +600°C
- with replaceable measuring insert
- as single or twin resistance thermometer
- terminal head Form B, BUZ, BUZH, BBK
- with transmitter option
Screw-in resistance thermometers with plug connector (90.2004)
- for temperatures from -50 to +300°C
- highly resistant to shock and vibration
- connector locked in for reliable contact, IP65 or IP69K protection
- available with transmitter
- GL approval for Type 902004/20
Screw-in RTD temperature probe with terminal head form J (90.2030)
- For temperatures from -50 ... +400°C
- As single or double RTD temperature probes
- Available with transmitter
- Protection class IP65
Screw-in resistance thermometers with connecting cable (90.2005)
- for temperatures from -50 to +400°C
- as single or twin resistance thermometer
- in 2-wire, 3-wire or 4-wire circuit
- connecting cable in PVC, silicone, Teflon or with metal braiding
|
|
|
|
Termorezistente verificate conform DIN 3440
|
Resistance thermometers for plant and equipment approved to DIN EN 14 597 (DIN 34 40) (90.2006)
- for indirect heating installations to DIN 47 54
- for temperatures up to 700°C
- as single, twin or triple resistance thermometer
- for operation in water, oil or air
- for approved control and limiter instruments
|
|
|
|
Termorezistente de insertie
|
Push-in resistance thermometers with terminal head Form B (90.2102)
- for temperatures from -50 to +600°C
- with replaceable measuring insert
- as single or twin resistance thermometer
- terminal head Form B, BUZ, BUZH, BBK
- available with transmitter
Push-in resistance thermometers with mounting plate (90.2104)
- for temperatures from -50 to 550°C
- IP54 protection in the protection tube area
- stainless steel protection tube
- connection via fast-on blades
- for use in baking ovens
Push-in resistance thermometers with bayonet lock (90.2109)
- for temperatures from -50 to +350°C
- with protection tubes in different materials
- as single or twin resistance thermometer
- good heat transfer through adjustable spring pressure
- insertion and removal without tools
Push-in RTD temperature probe with terminal head form J (90.2130)
- for temperatures from -50 ... +400°C
- As single or double RTD temperature probes
- Available with transmitter
- Protection class IP65
Push-in resistance thermometers with connecting cable (90.2105)
- for temperatures from -50 to +400°C
- as single or twin resistance thermometer
- in 2-wire, 3-wire or 4-wire circuit
- connecting cable in PVC, silicone, PTFE, or with metal braiding
Push-in resistance thermometers in steam-tight version (90.2830)
- for temperatures from -70 to +200°C
- as single, twin or triple resistance thermometer
- in 2-wire, 3-wire or 4-wire circuit
- connecting cable in PTFE, FEP and silicone
|
|
|
|
Termorezistente cu izolatie minerala
|
Mineral-insulated resistance thermometers to EN 60 751 (90.2221)
- for temperatures from -50 (-200) to +600°C
- flexible sheath with shock-protected sensor
- as single or twin resistance thermometer in 2-wire, 3-wire or 4-wire circuit
- fast response time
- application-specific fitting length
|
|
|
|
Termorezistente de insertie pentru produse alimentare
|
RTD insertion temperature probes (90.2305)
- For temperatures from -50 ... +260°C
- Steam-tight and pressure-resistant
- High mechanical strength
- For use in the food industry
- Available with multiple measurement points
|
|
|
|
Termorezistente pentru contoare de energie termica, cu aprobare de model PTB
|
Heat meter resistance thermometers with terminal head, PTB approved (90.2424)
- for temperatures from 0 to 200°C, Type Direct Long (DL) and Pocket Long (PL)
- approved to calibration regulations EO 22 and EN 14 34 as interchangeable temperature probes according to AGFW regulation FW 202
- paired and certified in-house
- measurement directly in medium or in additional pocket
Heat meter resistance thermometers with connecting cable, PTB approved (90.2425)
- for temperatures from 0 to 180°C, Type Direct Short (DS), Direct Long (DL), Pocket Long (PL) and Pocket Short (PS)
- approved to calibration regulations EO 22 and EN 14 34 as interchangeable temperature probes according to AGFW regulation FW 202
- paired and certified in-house
|
|
|
|
Elemente de montaj pentru sonde de temperatura
|
Installation locations for temperature probes (90.2440)
- ball valves
- tees
- pockets
- adapter screw fittings
- mounting accessories
|
|
|
|
Termorezistente pentru suprafete
|
RTD surface temperature probes (90.2522)
- For temperatures from -50 ... +260°C
- With probes made of various materials
- For round and level surfaces
- Easy and quick installation
- Low thermal mass
|
|
|
|
Termorezistente de ambient si canal
|
Indoor, outdoor and duct resistance thermometers (90.2523)
- for temperatures from -30 to +80°C (200°C)
- for use in HVAC
- IP20 to IP65 protection
- for 2-wire, 3-wire or 4-wire connections
- fitted transmitter option 4-20mA or 0-10V
|
|
|
|
Aparate de masura portative pentru temperatura
|
Test equipment for temperature and its traceability (90.2721)
- Pt100 precision resistance thermometer
- calibrated temperature measuring system with precision indicator
- DKD calibration provided as a service
- calibration range -80 to +1100°C
|
|
|
|
Termorezistente pentru industria alimentara
|
Resistance thermometers for the food and pharmaceutical industries (90.2810)
- for temperatures from -50 to +250°C
- EHEDG certification
- stainless steel protection tubes
- with optional 2-wire transmitter
- CIP-compliant installation
|
|
|
|
Termorezistente pentru procese tehnologice, optional in carinate EEx "d" si EEx "i"
|
RTD temperature probes for process technology with EX (ATEX) approval (90.2820)
- for temperatures from -200 to +600°C
- with protection tubes made of stainless steel, titanium, tantalum, Inconel and/or Hastelloy
- available with two-wire transmitter (4 - 20mA / HART®) in Ex version
- Ex II 1/2 GD EEx ia II C T1 - T6 IP6x T80 - T400°C1
- Ex II 1/2 GD EEx d II C T1 - T6 IP6x T80 - T400°C1
- with replaceable measuring insert
|
|
|
|
Termorezistente cu iesire CANopen
|
Resistance thermometers with CANopen output (90.2910)
- for temperatures from -50 to +450°C as single or twin resistance thermometer
- vibration-proof construction
- limit monitoring
- settable through standard CANopen software tools
|
|
|
|
UMIDITATE
|
Date de baza
|
The measurement of humidity in air (90.7000)Pentru date suplimentare in limba germana descarcati fisierul pdf de aici
|
|
|
|
Sonde de umiditate si higrostate
|
Hygro and Hygrothermo Transducers (capacitive) for climatic applications (90.7020)
- To measure relative humidity and temperature
- For versatile climatic applications and ventilation
- For indoor and air duct mounting
- Compact rod models with connection cable or J-shaped connection head
- With current and voltage outputs as well as passive Pt 100 temperature output
- With fast-response capacitive humidity sensor
Hygrostats (capacitive) for HVAC applications (90.7022)
- for on-off control of relative humidity
- for domestic and office buildings
- for the control of ventilating systems
- in wall and duct versions
- output relay with changeover contact
Hygro/hygrothermal transducers (hygrometric) (90.7031)
- for measuring relative humidity and temperature
- for mounting indoors, outdoors, and in air ducts
- with resistance, current or voltage outputs
- for permanent use in the high-humidity range up to 100% RH (duct version)
- no power supply necessary for passive instruments
- sensing element does not need any maintenance in clean air (no regeneration necessary)
Psychrometer (90.7051)
- For measuring relative humidity and temperature
- For direct connection to microprocessor-controlled display, control and recording equipment
- For measurement in atmospheres that are strongly contaminated or contain solvents
Hygro/hygrothermal transducers (capacitive) for climate monitoring (90.7021)
- for measuring relative humidity in air and temperature
- for building automation, storage rooms, climate and ventilation control
- as indoor, wall and duct versions
- special miniature rod version for OEM applications
- with current or voltage outputs as well as passive temperature output
- hygrothermometers as table-top or wall-mounting units
Humidity and temperature transducers for industrial applications (90.7023)
- measurement within the entire range from 0 to 100% RH
- temperature-resistant up to 180°C (depending on probe type)
- withstands pressures up to 100bar (depending on probe type)
- rugged metal housing, IP65 protection
- outstanding accuracy and stability
- graphical trend display and measurement history of the past year
- retraceability to NIST
- options: calculation and output of dew point, absolute humidity, mixing ratio, wet bulb temperature, enthalpy and water vapor pressure
Hygrostats (hygrometric) for duct, wall und C-rail mounting (90.7032)
- for on-off control of relative humidity
- in air ducts, climatic cabinets, storage and cold rooms
- for controlling humidifying and de-humidifying plant
- for duct, wall and C-rail mounting
Intrinsically safe industrial transducers for humidity, temperature and derived variables (90.7023)
- hygrothermal transducers measure relative humidity in air, and temperature
- option: calculation of dew point, absolute humidity, mixing ratio and wet bulb temperature
- new user-friendly, modular transducer concept
- intelligent interchangeable probes with storage of all calibration coefficients
- safe operation of the instrument as a whole in Category 1G / Zone 0 and 1D / Zone 20 areas, with protective cover
- retraceable to NIST (including certificate)
|
|
|
|
ACCESORII
|
Screw-in and weld-in pockets (90.9721)
- for thermocouples and resistance thermometers
- thermometers can be replaced without draining the system
- pockets in different materials
- operating pressure up to 450bar
- available with acceptance certificate 3.1B (machined from solid)
Terminal heads and blocks (90.9722)
- for thermocouples and resistance thermometers
- terminal heads in different materials
- Protection IP65 max.
- versions for lead sealing
Compensating and connecting cables (90.9723)
- compensating cables to IEC 584 and DIN 43714
- versions from -190 to +400°C
- sheath in Teflon, silicone, PVC or fiberglass
- for single and twin thermocouples
Pipe fittings and flanges, sockets for bayonet locks (90.9725)
- for temperatures up to 600°C
- for different fitting lengths
- simple installation and replacement
- pressure-tight sealing
Connectors (90.9726)
- for temperatures from -60 to +260°C
- problem-free replacement with fixed cables
- quick connection of test instruments
Measuring inserts for screw-in thermocouples and resistance thermometers with terminal head Form B (90.9727)
- for temperatures from -200 to +1150 °C
- as single or twin insert
- available with transmitter
Thermocouples to DIN 43 732 (90.9728)
- for temperatures up to +1600°C
- standardized voltage tables for thermocouples to EN 60 584, Part 1 and DIN 43 710
- for push-in thermocouples to DIN 43 733
|
|
|
|
